HAM 40-1921-HB
solid carbide deburring and chamfering mill
Product information
- for chamfering and deburring
- shrink fit
Available in many variants
Material Properties
Material
wrought aluminium alloys
casting aluminium alloys
steel < 800 N/mm²
steel < 1200 N/mm²
steel < 1600 N/mm²
steel < 55 HRC
steel < 60 HRC
steel < 66 HRC
stainless steel < 800 N/mm²
stainless steel > 800 N/mm²
lamellar graphite cast iron
spheroidal graphite cast iron
high-temperature alloys
titanium
non-ferrous metals / copper alloys
graphite & fibre composite
MQL
maximum cooling
without cooling
AIR
very suitable
limited suitable
Properties "HAM 40-1921-HB"
| clamping surface: | HB |
|---|---|
| cutting direction: | right hand cutting |
| head coating: | no |
| internal cooling: | no |
| nominal diameter tolerance: | H7 |
| saft diameter tolerance: | h6 |
| spiral type: | slanted fluted |
Article No
Nominal Ø
(d1) [mm]
(d1) [mm]
Shank Ø
(d2) [mm]
(d2) [mm]
Length
(l1) [mm]
(l1) [mm]
Flute Length [mm]
Cutting Length
(l2) [mm]
(l2) [mm]
Stock
HAM 40-1921-0600-HB
6.00 mm
6.00 mm
57.00 mm
10.50 mm
2.80 mm
63
HAM 40-1921-0800-HB
8.00 mm
8.00 mm
63.00 mm
14.00 mm
3.80 mm
50
HAM 40-1921-1000-HB
10.00 mm
10.00 mm
72.00 mm
17.50 mm
4.80 mm
4
HAM 40-1921-1200-HB
12.00 mm
12.00 mm
83.00 mm
21.00 mm
5.80 mm
69
HAM 40-1921-1600-HB
16.00 mm
16.00 mm
92.00 mm
28.00 mm
7.80 mm
11
HAM 40-1921-2000-HB
20.00 mm
20.00 mm
104.00 mm
32.00 mm
9.80 mm
9
Description
| Spiral type | slanted fluted |
| Cutting direction | right hand cutting |
| Clamping surface | HB |
| Head coating | no |
| Internal cooling | no |