HAM 40-2041
solid carbide deburring and chamfering mill
Product information
- forward- and backward chamfering
- shrink fit
Available in many variants
Material Properties
Material
wrought aluminium alloys
casting aluminium alloys
steel < 800 N/mm²
steel < 1200 N/mm²
steel < 1600 N/mm²
steel < 55 HRC
steel < 60 HRC
steel < 66 HRC
stainless steel < 800 N/mm²
stainless steel > 800 N/mm²
lamellar graphite cast iron
spheroidal graphite cast iron
high-temperature alloys
titanium
non-ferrous metals / copper alloys
graphite & fibre composite
MQL
maximum cooling
without cooling
AIR
very suitable
limited suitable
Properties "HAM 40-2041"
| clamping surface: | HA |
|---|---|
| cutting direction: | right hand cutting |
| head coating: | no |
| internal cooling: | no |
| nominal diameter tolerance: | h10 |
| saft diameter tolerance: | h6 |
| spiral type: | straight fluted |
Article No
Nominal Ø
(d1) [mm]
(d1) [mm]
Shank Ø
(d2) [mm]
(d2) [mm]
Length
(l1) [mm]
(l1) [mm]
Flute Length [mm]
Cutting Length
(l2) [mm]
(l2) [mm]
Stock
HAM 40-2041-0280
2.80 mm
6.00 mm
75.00 mm
3.00 mm
0.00 mm
20
HAM 40-2041-0380
3.80 mm
6.00 mm
75.00 mm
4.00 mm
0.00 mm
26
HAM 40-2041-0480
4.80 mm
6.00 mm
75.00 mm
5.00 mm
0.00 mm
12
HAM 40-2041-0580
5.80 mm
6.00 mm
100.00 mm
6.00 mm
0.00 mm
9
HAM 40-2041-0780
7.80 mm
6.00 mm
100.00 mm
8.00 mm
0.00 mm
2
HAM 40-2041-0980
9.80 mm
6.00 mm
100.00 mm
9.00 mm
0.00 mm
63
Description
| Spiral type | straight fluted |
| Cutting direction | right hand cutting |
| Clamping surface | HA |
| Head coating | no |
| Internal cooling | no |