HAM 40-5380
solid carbide end mill
Product information
- special geometry with unequal helix
- high chipping volume (up to 1,5 x D)
- very smooth running and very little vibrations during machining
- cutting area geometrical balanced
- with one central internal coolant
- not suitable for drilling
- shrink fit
- High Performance Cutting
- High Speed Cutting
- HSF - Hybride Surface Finishing
Available in many variants
Material Properties
Material
wrought aluminium alloys
casting aluminium alloys
steel < 800 N/mm²
steel < 1200 N/mm²
steel < 1600 N/mm²
steel < 55 HRC
steel < 60 HRC
steel < 66 HRC
stainless steel < 800 N/mm²
stainless steel > 800 N/mm²
lamellar graphite cast iron
spheroidal graphite cast iron
high-temperature alloys
titanium
non-ferrous metals / copper alloys
graphite & fibre composite
MQL
maximum cooling
without cooling
AIR
very suitable
limited suitable
Properties "HAM 40-5380"
| clamping surface: | HAK |
|---|---|
| cutting direction: | right-hand cutting |
| head coating: | no |
| helix type: | right-hand helix |
| internal coolant: | yes |
| nominal diameter tolerance: | f8 |
| shank diameter tolerance: | h6 |
Article No
Nominal Ø
(d1) [mm]
(d1) [mm]
Shank Ø
(d2) [mm]
(d2) [mm]
Length
(l1) [mm]
(l1) [mm]
Flute Length [mm]
Cutting Length
(l2) [mm]
(l2) [mm]
Stock
HAM 40-5380-0600-18
6.00 mm
6.00 mm
57.00 mm
17.00
13.00
12
HAM 40-5380-0800-25
8.00 mm
8.00 mm
63.00 mm
24.00
19.00
22
HAM 40-5380-1000-30
10.00 mm
10.00 mm
72.00 mm
29.00
22.00
7
HAM 40-5380-1200-36
12.00 mm
12.00 mm
83.00 mm
35.00
26.00
21
HAM 40-5380-1600-42
16.00 mm
16.00 mm
92.00 mm
41.00
32.00
13
HAM 40-5380-2000-52
20.00 mm
20.00 mm
104.00 mm
54.00
38.00
10
Description
| Spiral type | right-hand helix |
| Cutting direction | right-hand cutting |
| Clamping surface | HAK |
| Head coating | no |
| Internal cooling | yes |