HAM 30-2800-0050
solid carbide center drill
Product information
- 4-facet ground
- spiral fluted
- Ø d1 0,5 - 0,8 mm only ground on one side
- shrink fit
Properties "HAM 30-2800-0050"
| clamping surface: | HA |
|---|---|
| coating: | no |
| cutting direction: | right hand cutting |
| cutting length L3: | 0.80 mm |
| groove length L2: | 6.50 mm |
| head coating: | no |
| internal cooling: | no |
| material: | VHM |
| neck diameter D3: | 0.00 mm |
| nominal diameter D1: | 0.50 mm |
| nominal diameter tolerance: | DIN |
| number of teeth: | 2.00 |
| overall length L1: | 25.00 mm |
| saft diameter tolerance: | h6 |
| shaft diameter D2: | 3.15 mm |
| shank length: | 0.80 mm |
| spiral type: | right hand helix |