HAM 40-1691
solid carbide roughing end mill
Product information
- special geometry with unequal helix and pitch
- for roughing with extremely high feed
- high chipping volume (up to 1,5 x D)
- very smooth running and very little vibrations during machining
- for hard materials with roughing serration
- High Performance Cutting
- shrink fit
Available in many variants
Material Properties
Material
wrought aluminium alloys
casting aluminium alloys
steel < 800 N/mm²
steel < 1200 N/mm²
steel < 1600 N/mm²
steel < 55 HRC
steel < 60 HRC
steel < 66 HRC
stainless steel < 800 N/mm²
stainless steel > 800 N/mm²
lamellar graphite cast iron
spheroidal graphite cast iron
high-temperature alloys
titanium
non-ferrous metals / copper alloys
graphite & fibre composite
MQL
maximum cooling
without cooling
AIR
very suitable
limited suitable
Properties "HAM 40-1691"
| clamping surface: | HA |
|---|---|
| cutting direction: | right hand cutting |
| head coating: | no |
| internal cooling: | no |
| nominal diameter tolerance: | f10 |
| saft diameter tolerance: | h6 |
| spiral type: | right hand helix |
Article No
Nominal Ø
(d1) [mm]
(d1) [mm]
Shank Ø
(d2) [mm]
(d2) [mm]
Length
(l1) [mm]
(l1) [mm]
Flute Length [mm]
Cutting Length
(l2) [mm]
(l2) [mm]
Stock
HAM 40-1691-0600
6.00 mm
6.00 mm
57.00 mm
0.00 mm
13.00 mm
43
HAM 40-1691-0800
8.00 mm
8.00 mm
63.00 mm
0.00 mm
19.00 mm
42
HAM 40-1691-1000
10.00 mm
10.00 mm
72.00 mm
0.00 mm
22.00 mm
22
HAM 40-1691-1200
12.00 mm
12.00 mm
83.00 mm
0.00 mm
26.00 mm
14
HAM 40-1691-1400
14.00 mm
14.00 mm
83.00 mm
0.00 mm
26.00 mm
4
HAM 40-1691-1600
16.00 mm
16.00 mm
92.00 mm
0.00 mm
32.00 mm
2
HAM 40-1691-2000
20.00 mm
20.00 mm
104.00 mm
0.00 mm
38.00 mm
5
HAM 40-1691-2500
25.00 mm
25.00 mm
110.00 mm
0.00 mm
38.00 mm
3
Description
| Spiral type | right hand helix |
| Cutting direction | right hand cutting |
| Clamping surface | HA |
| Head coating | no |
| Internal cooling | no |