HAM 40-1961
solid carbide deburring and chamfering mill
Product information
- for chamfering and deburring
- shrink fit
Available in many variants
Material Properties
Material
wrought aluminium alloys
casting aluminium alloys
steel < 800 N/mm²
steel < 1200 N/mm²
steel < 1600 N/mm²
steel < 55 HRC
steel < 60 HRC
steel < 66 HRC
stainless steel < 800 N/mm²
stainless steel > 800 N/mm²
lamellar graphite cast iron
spheroidal graphite cast iron
high-temperature alloys
titanium
non-ferrous metals / copper alloys
graphite & fibre composite
MQL
maximum cooling
without cooling
AIR
very suitable
limited suitable
Properties "HAM 40-1961"
| clamping surface: | HA |
|---|---|
| cutting direction: | right hand cutting |
| head coating: | no |
| internal cooling: | no |
| nominal diameter tolerance: | H7 |
| saft diameter tolerance: | h6 |
| spiral type: | slanted fluted |
Article No
Nominal Ø
(d1) [mm]
(d1) [mm]
Shank Ø
(d2) [mm]
(d2) [mm]
Length
(l1) [mm]
(l1) [mm]
Flute Length [mm]
Cutting Length
(l2) [mm]
(l2) [mm]
Stock
HAM 40-1961-0400
4.00 mm
4.00 mm
54.00 mm
8.50 mm
3.30 mm
72
HAM 40-1961-0600
6.00 mm
6.00 mm
57.00 mm
13.00 mm
5.00 mm
5
HAM 40-1961-0800
8.00 mm
8.00 mm
63.00 mm
17.00 mm
6.80 mm
17
HAM 40-1961-1000
10.00 mm
10.00 mm
72.00 mm
21.50 mm
8.50 mm
14
HAM 40-1961-1200
12.00 mm
12.00 mm
83.00 mm
25.50 mm
10.00 mm
20
Description
| Spiral type | slanted fluted |
| Cutting direction | right hand cutting |
| Clamping surface | HA |
| Head coating | no |
| Internal cooling | no |